A710L-V Panic Exit Device

A710L-V

Material:

Push bar –Steel pressed or stainless steel pressed
Head Cover – Steel pressed or stainless steel pressed
Spring – Stainless steel

Latch Bolt:

5/8’ throw, stainless steel

Dead Latch Bolt:

9/16”, steel

Strike:

For 5/8” stop

Projection:

2-1/2” maximum, 1-7/8” pressed

Reversible:

Non-handed, reversible for all functions and trims

For Door:

1-3/4” thick of wood or metal door. Specify thickness if other than 1-3/4”

Door Width:

3’ standard for door width of 2’-8” to 3’-0”; 4’ standard for door width of 3’-8” to 4’-0”

Stile:

4-1/4” minimum

Top and bottom rod length for 7’ door:

Top rod 35-1/3” , bottom rod 31-1/4”

Top and bottom rod length for 8’ door:

Top rod 47-2/3” , bottom rod 31-1/4”

Mounting Height:

40-5/16” from CL to finished floor recommended

Mounting:

Furnished standard with sheet metal & machine screws or SNB as option.

Cylinders:

For trim, knob, lever & thumb-piece type “Schlage C” key way

Dogging:

1/4 turn, hex key dogging on non-fire labeled device

UL Listed:

For “Panic Hardware” and “UL”. Labeled (3 hours) fire exit hardware. (testing)

Ansi Standard:

A156.3 Grade 1

Operation:

Inside by slight pressure on any point of the push bar all time

Head Cover:

Big 8-1/2”x2-3/4”x2-1/2” (216mm x 68.3mm x 62mm) &
Small 6-1/3”x2-3/4”x2-1/2” (160mm x 68.2mm x 60mm)

Standard Finishes:

US32D (or other available finishes upon request & discussion)